Fuel tank inspection and refurbishment
After the tank was removed, inspected and pressure tested, the tank was deemed good and the client wanted to reuse the tank rather then buy new. This photo of the tank primed.
This photo is of the tank primed.
This is the tank with a final top coat.
This is the tank with a final top coat.
Added neoprene to all sides of the tank so that the tank does not rub against and other surface.
This is the tank reinstalled into the bulge.
After the tank has been reinstalled and sucured into the hold it was wired up.
After the tank has been reinstalled and sucured into the hold it was wired up.
This is the deck hatch that covers the fuel tank. We patch sanded and painted this cover while off the boat.